Handheld Shower Hose Adaptor

$11.95
In Stock

or 4 payments of $2.99 with Info


The Handheld Shower Hose Adaptor allows you to add a shower filter to your existing handheld shower head & hose. The problem with installing a shower filter to a handheld shower hose is lack of space between the shower hose connection and the wall. This adaptor allows you to easily install a shower filter with your existing shower hose and allows the shower filter to hang inline.

Specifications:

  • Length: 150mm
  • Braided Stainless Steel
  • Fittings: Standard Australian 1/2" Male & 1/2" Female BSP Threads
  • Operating Temp: 0°C - 90°C

Installation:

  1. Turn off water supply and remove shower hose from wall connection using a spanner
  2. Clean all connection threads and remove any old thread tape
  3. Install Adaptor Hose to wall thread/fitting. Use a small amount of thread tape as required, usually 1-2 wraps is enough
  4. Install Shower Filter to Adaptor hose. Use a small amount of thread tape as required, usually 1-2 wraps is enough
  5. Install shower hose to Shower Filter. Use a small amount of thread tape as required, usually 1-2 wraps is enough
  6. Turn on water supply and inspect for leaks. If any leaks occur, re-tighten and/or add more thread tape to thread

 

 

(SHRHHADAPT)

SKU SHRHHADAPT
Barcode # 6958959304943
Brand Aussie Storm Shop
Shipping Weight 0.0700kg