Propur Promax Under Sink Fluoride Water Filter System

Sold Out
$349.95

Or 4 interest-free payments of $87.49 with Learn more.



Calculate Shipping



Free Shipping - $0.00
Delivery Australia Wide in 10-15 business days. Not available to PO Boxes or Australia Post Parcel Lockers.

The Propur Promax Under Sink Fluoride Water Filter System is designed to fit under most kitchen/laundry/bathroom sinks with minimal installation (Licensed Plumber required for installation).  Enjoy filtered water by just turning on the cold water or with a dedicated separate tap (not included). With ProMax Filter Technology, reduce a broad range of over 200 contaminants including VOC’s, lead, fluoride, heavy metals, pesticides, SVC’s, disinfectants, inorganic non-metallics, herbicides, pharmaceuticals, PFOA, PFOS and micro-organisms. Tested to NSF/ANSI 42, 53 & P231 standards. 

  • Reduces Chlorine
  • Reduces Fluoride
  • Reduces Glyphosate, Pesticides & Herbicides
  • Reduces Aluminium
  • Reduces Lead
  • Reduces PFOA & PFOS (from Fire Fighting Foam) 
  • Reduces Giardia & other Micro-Organisms 
  • Reduces Pharmaceutecals 
  • Reduces many, many more contaminants 
Features of the Propur Promax Under Sink Fluoride Water Filter System: 
  • Ideal for kitchens, bathrooms, laundry, workshop, workplace
  • Single stage design
  • Premium quality housing and 3/8" quick-connect fittings
  • Full 3/8" Polyethylene tubing
  • Includes one ProMax™ filter element
  • Enjoy filtered water when you want it
  • ABS plastic housing - BPA & BPS free
  • No power required
  • Easy to replace filter element
  • Overall size is 12cm (4.75") x 12cm (4.75") x 32cm (12.5")

Propur Under Counter System with ProMax Specifications:

  • Cold water only
  • One inlet & one outlet (3/8" quick-connect fittings)
  • Install or attach water supply to the inlet side with the oulet side going to the tap/faucet (tap not included).
  • Type of installation: Under Sink / Counter
  • Maximum Working Pressure: 689.5 Kpa (100 psig)
  • Minimum Working Pressure: 124 Kpa (20 psig)
  • Maximum Working Temperature: 38° C (100° F)
  • Minimum Working Temperature: 5° C (41° F)
  • Recommended Flow Rate: 0.75 - 3.8 LPM (0.2 - 1.0 gpm)
  • Contaminant Reduction: Refer to Lab Report (Please email us for detailed report)
  • Filter Life Expectancy: Approx 12-18 months
  • Replacement filter: PMC34RF (available and in stock)

Package contents:

  • 1x Filter Housing with 2x NPT 1/4" (6mm) Ports with 3/8" quick-connect tube fittings fitted in housing
  • 1x Mounting Bracket attached to housing (includes screws)
  • 1x Promax filter element installed in housing
  • 1x 3/8" NSF/ANSI Food grade tap connecting tube (Length: 1.8m) 
  • 1x Filter cartridge replacement wrench
  • 1x Spare 1/4" (6mm) quick-connect tube inlet fitting for use with 1/4" (6mm) inlet tubes (1/4" inlet tube not supplied).

Tools and hardware required (not supplied):

  • Adjustable wrench
  • Screwdriver
  • Plastic tube cutter
  • Plumber's tape
  • 1/2" drill bit for tap kit.
  • 1/4" inlet tubing (when not using supplied 3/8" tube for inlet)
  • Mains T-piece shut-off tap/valve for braided mains lines with 3/8" or 1/4" quick-connect fitting (size depends on inlet tube size). Please check the hose diameter of your braided lines.
  • ​If you have a solid copper mains line you will need a Line Piercing Needle Saddle Valve or cut and weld in a T-Piece shut off valve. Licensed Plumber Required for installation.
Replacement Filter Cartridges are available.
Please note that this system uses 3/8" quick-connect fittings on housing inlet and outlet. We supply a spare 1/4" (6mm) quick-connect fitting for the filter housing inlet if 1/4" (6mm) inlet tubing is used instead.
Additional hardware will be required for inlet connection to the cold water mains.
Licensed Plumber Required for installation.


Others Also Bought



More From This Category