Berkey PF2 Fluoride Reduction Filters (Suits Black Berkey Filters) 1x Pair (2)
***Please note: Due to a combination of supply shortages and increased demand, we have placed a limit of 1 pair of PF2 filters per order to allow as many people as possible to replace their filters. If you require more than one pair for immediate use, don't hesitate to contact the sales team directly on 07 55413569.
Tested up to 98.4% reduction in fluoride.
The Berkey PF2 reduction elements are designed for use in conjunction with Black Berkey Purification Elements. The PF2 Elements screw onto the Black Berkey element thread stems and hang in the bottom tank of the Berkey Filter System. After the Black Berkey Purification Elements have filtered the water, the PF2 Elements then perform a second stage filtration process which is designed to absorb the following unwanted elements found in drinking water:
- Arsenic V and pre-oxidized Arsenic III
- Other residual heavy metal ions
FLUORIDE: Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 GPM (11 lpm) per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (98.4% reduction).
When to replace?
Under normal conditions, it is recommended that each set of two Berkey PF-2 elements be replaced after 1,000 gallons/pair (3,785 litres/pair) or 2 years, whichever comes first.
- 1x Pair (2) Berkey PF2 Filter Elements
- 1x Berkey Priming Button